CAM Buff Adaptor — a precision-machined buffing pad adaptor for fitting CAM screw-type and velcro pads to rotary polishers, drills and angle grinders. Built to take the load of full-throttle compounding and cutting work.

Description

The CAM adaptor is the link between your polishing tool and your pads. Standard threaded shank fits common rotary polishers. Machined-flat backing keeps pads spinning true at high RPM. Compatible across the CAM range of screw pads and velcro backing pads. Essential for any pro detailer or panel-shop running a CAM polishing setup.

Health & Safety

• Always wear safety glasses or a face shield when polishing — pads can throw debris at speed
• Check the adaptor is fully threaded onto the tool before powering on
• Match pad diameter to your tool's rated maximum — never exceed
• Inspect the adaptor for thread wear or bending before each use — replace if damaged

How to use

With the tool unplugged or battery removed, screw the CAM adaptor onto the tool's spindle until firmly seated — do not over-tighten. Attach your selected CAM pad (screw type or velcro) to the adaptor. Confirm the pad sits flat with no wobble. Power up at low RPM first to verify smooth rotation before working up to operating speed.