CAM Screw Pad — Black. The finest of the CAM screw-pad range — designed for final finishing, micro-marring removal, glaze application and high-gloss refinement on paint, gel-coat and clear-coat finishes.

Description

Black indicates the softest, finest foam in the CAM polishing system — ideal for the last step in a multi-stage paint correction or for one-step glaze and wax application. Open-cell foam construction allows even product distribution and minimal heat build-up. Screw-mount design pairs with the CAM Buff Adaptor for secure attachment to rotary and dual-action polishers.

Health & Safety

• Wear safety glasses or a face shield during polishing operations
• Inspect the pad before each use — replace if torn, contaminated or worn unevenly
• Don't run the pad above the polisher's rated max RPM
• Avoid running on edges or panel ridges — concentrate the foam flat against the surface

How to use

Screw onto a CAM Buff Adaptor fitted to your rotary polisher. Apply 3–4 pea-sized dots of glaze, finishing polish or wax to a clean section of paint. Spread the product at low RPM (300–600), then increase to working speed (1000–1500 RPM) and work in overlapping passes for 30–45 seconds per panel. Wipe residue with a clean microfibre and inspect the finish.