Max Plus is a concentrated blend of acids and detergents built to dissolve red dirt and pindan staining that a standard truck wash leaves behind.

• Heavy duty wash-downs on trucks, road trains and cars.
• Targets rail dust, bull dust, pindan dust, water stains and iron ore dust, as well as traffic film, grime, grease and bugs.
• Cleans and brightens aluminium and stainless steel, and is safe to use around engine bays and running gear.

• Rinse the surface first to remove loose dirt and debris.
• Apply with a sponge, brush or spray, working from the bottom up.
• Allow a few minutes for the acid to penetrate, then rinse thoroughly with clean water.
• Do not let the product dry on the surface, streaking will occur.

Apollo is a heavy duty acid wash that dissolves red dirt, grease, oil and rust film off trucks and vehicles, and brightens aluminium and stainless steel as it goes.

• Heavy duty truck and vehicle washing, red dirt removal, and cutting through built-up grease, oil and rust film.
• Doubles as a wheel cleaner at a stronger dilution.
• Suits fleet wash bays, transport depots, mine site services and vehicles stained heavily with red dirt.

• Rinse the vehicle with water to remove loose dirt and debris.
• Dilute 1:50 for general truck washing, or 1:10 for wheels and heavier staining.
• Apply with a pressure washer or spray gun, working from the bottom up.
• Allow a few minutes to penetrate, then rinse thoroughly. Do not let it dry on the surface.

Rail Dust Remover targets iron, not dirt. An organic-based formula with strong surfactants that dissolves embedded metal particles and the rust staining they leave behind, from alloy wheels to concrete hardstand.

• Rail dust and heavy brake dust on alloy wheels, engines, undercarriages and body panels.
• Bore water and rust staining on concrete, brick, terrazzo and stone.
• Suits mine site services, workshop and wash bay floors, exterior facades, equipment wash-downs, and pre-treatment before detailing or restoration.

• Rinse the surface with clean water first.
• Apply evenly to the affected area and allow it to dwell — it works on contact with the iron deposits.
• Rinse thoroughly with water before it dries.

Titan is a heavy duty degreaser built to cut through baked-on grease, oil and grime on engines, equipment and workshop floors.

• Engine bays, motors, transmissions and heavy machinery.
• Workshop and wash bay floors, concrete and equipment coated in oil and grease.
• Degreasing before servicing, detailing or repainting.

• Rinse loose dirt and debris off the surface first.
• Dilute to the ratio that suits the job (stronger for heavy build-up, weaker for general cleaning) and apply from the bottom up.
• Allow a short dwell time to break down the grease, then agitate with a brush on heavy build-up.
• Rinse thoroughly with clean water before it dries.

Strike is a high grade truck wash and degreaser in one. Industrial strength, built to cut road film, grease and oil off heavy vehicles without needing a separate degreaser for the engine bay.

• General truck and heavy vehicle washing, engine and motor degreasing, and cutting through built-up grease, oil and road grime.
• Works on workshop and wash bay floors.
• Suits fleet depots, mine site services, workshops and detailing operations.

• Rinse the surface with water to remove loose dirt.
• Dilute to the suitable ratio for the job and apply from the bottom up, working in sections so it doesn't dry out.
• Allow a short dwell time, agitate with a brush on heavy build-up, then rinse thoroughly with clean water.